Technical data for Speedflow

All Speedflow models use the same componentry, the differences being casing material and finish. Note that the Speedflow has an adjustable fan speed, from 3800 to 8200 rpm, which is reflected in some of the figures being displayed as a range.


7 years: 3 years labour / 7 years parts (terms apply)


  • Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Speedflow® wrench.
  • Aluminium base, with Ø 8 mm holes for wall mounting. It includes silent-blocks to damp mechanical vibrations.
  • Fire resistant plastic UL 94-V0 fan scroll.
  • High speed motor. Universal brush motor, 3800-8200 rpm, A class. RPM may be adjusted manually by means of a potentiometer. The motor includes a safety thermal cut-off at 120ºC.
  • Aluminium centrifugal double asymmetrical inlet fan wheel.
  • Waved wire NiCr heating element mounted on a mica frame that incorporates a self-resetable thermal cut-off at 80ºC which disconnect the whole appliance.
  • Fully adjustable (5-25 cm) IR electronic detection sensor by means of a potentiometer.
  • Sensors come with a polycarbonate viewing window.


Voltage 100-120, 208, 220-240 V
Frequency 50/60 Hz
Electrical isolation Class I
Dimensions (W x H x D, in mm) 289 x 266.8 x 100 (M06A/AC/ACS)
294 x 270.5 x 100 (M06AF)
Weight 3.6 kg (M06A/AC/ACS)
6.9 kg (M06AF)
Effective airflow 61-98 m3/h, 1012-1632 l/min
Nominal airflow 73-118 m3/h, 1215-3200 l/min
Air velocity 90-180 Km/h
Total power 1150 W
Motor power 250 W
Heating element power 900 W
Consumption 4.8 A (240 V)
RPM 3800 – 8200
Air temperature (10 cm distance / 21 ºC) 41 – 44 ºC
Noise level (at 2 m) 64-74 dB
Protection level IP23